1. When the 24 hour clock begins to count down and stops at ZERO the JOIN button will be turned ON!
2. You must wait until your sponsor sends you his/her link.
3. ONLY 1 entry per person or business/non-profit organization.
4. Be sure to check and see if your sponsor’s username is on the top of the registration form. Fill out the form as carefully as possible. Review it before you hit submit.
5. You will receive an email with a verification link in it. Click on that link and you will automatically be registered in QLxchange and OneX simultaneously. You will also be placed somewhere on your sponsor’s matrix
6. Take a few minutes to check your profile. Also you will find your URL (link to send to your people) on the overview page.
7. You now will begin to send out your link to your people. Please take your time. Make sure that they have completed the registration correctly.
8. If you are sponsoring family members or friends and are using your computer at home, that is fine. Just remember each person must have their own email address, username and government ID#.
9. We will continue to invite all of our people on our list and get them registered.
10. It will be fun to watch our matrix fill up.
We will be informed when the next clock will begin to count down.
At this time we do not have any information on the Payment Processor. But I know that we will have all the information we need before they start the FUND clock counting down.
During the registration process all of our information needed to open an account with the Payment Processor was also collected.
At this time we can begin to put funds in our wallets.
You will find your wallet in the back office.
It will still be part of the Payment Processor but access is not necessary through their website every time we want to add, send or transfer funds.
You can fund it with as much money as you need to complete the following steps if you so choose to participate in them.
Step 1
Decide which upgrades you want to put on your Pre-Order form.
You can also use Keys to place your Pre-Order.
You select each Tier one at a time. The software will look in your wallet and see if you have enough funds in your wallet.
If “yes” then it will mark off that Tier.
Select "Use Key" if you want to use it for Tier 1. Again the software will check your wallet and key bank to make sure that you have funds or keys available.
No funds are deducted from your wallet for your Pre-Ordered upgrades.
Here are the 4 Tiers in Stage 1 that you can pre-order.
Everyone pays the same amount for upgrades.
$5 Row 1 Tier 1
$10 Row 2 Tier 2
$20 Row 3 Tier 3
$40 Row 4 Tier 4Step 2
• BUY (1 to 10) Only shows if balance of keys is 0.
• SEND (1 at a time) Only shows if balance of keys is >0.
• TRANSFER (1 to 10) Only shows if balance of keys is >0.
• USE Only shows if the member is inactive.
During the funding countdown clock we will only be able
to choose 2 options.
Buy: 1 to 10 keys if our balance is zero.
If you want to purchase a larger amount of keys you must contact admin.
TRANSFER: 1 to 10 keys can be transferred to one person at a time.
A drop down window will appear when you click on transfer.
The only people you can transfer keys to is your SPONSOR and your PERSONALLY SPONSORED PEOPLE. All of these names will appear in that drop down window. Once you transfer keys to someone else they assume the ownership of those keys. They could also transfer these keys to their PERSONALLY SPONSORED PEOPLE or back to you (their sponsor).
Naturally all keys bought at this time will be deducted from your wallet.
Step 3
Choose Automatic Upgrade Off:
You must upgrade manually. This could cause loss in upgrade payments from people in your matrix. As long as you are aware you are doing this manually then you are OK.
Choose Automatic Upgrade On Next Tier:
The software will look for what the next Tier is that you need upgrade to.
If funds are available in your wallet the software will automatically upgrade you to that Tier. However, it will also shut off this choice and you must go in and choose Automatic Upgrade On Next Tier again.Choose Automatic Upgrade On Continuous:
The software will continually watch for the next upgrade you need to pay. If the funds are available in your wallet it will be paid. It will now look at the next upgrade and check your wallet. Again, if the funds are available this upgrade will be paid. If for some reason there is not enough funds in your wallet, the software will check again in an hour. It will keep checking until the funds are available and get the next upgrades paid.
The option is absolutely the greatest idea especially if you work all day and cannot be checking to see if you need to upgrade. You also cannot miss any upgrade with the software continuously check for upgrades and funds. FUNDING – PRE-ORDERS – AUTOMATIC UPGRADE CHOICES
CLOCK COUNTS DOWN TO ZERO!
The manual upgrade and join buttons
will be turned OFF!
will be turned OFF!
The software will start with the smallest member ID#
and process all upgrades from that member’s Pre-Order table.
This same process will be repeated through every member
that also completed their Pre-Order!
Commissions will be paid!
Commissions will be paid!
This whole process will only take several minutes.
Once completed OneX will be turned on for good!
Our choice of "Automatic Upgrades" will now go into effect.
1. When the 24 hour clock begins to count down and stops at ZERO the JOIN button will be turned ON!
2. You must wait until your sponsor sends you his/her link.
3. ONLY 1 entry per person or business/non-profit organization.
4. Be sure to check and see if your sponsor’s username is on the top of the registration form. Fill out the form as carefully as possible. Review it before you hit submit.
5. You will receive an email with a verification link in it. Click on that link and you will automatically be registered in QLxchange and OneX simultaneously. You will also be placed somewhere on your sponsor’s matrix
6. Take a few minutes to check your profile. Also you will find your URL (link to send to your people) on the overview page.
7. You now will begin to send out your link to your people. Please take your time. Make sure that they have completed the registration correctly.
8. If you are sponsoring family members or friends and are using your computer at home, that is fine. Just remember each person must have their own email address, username and government ID#.
9. We will continue to invite all of our people on our list and get them registered.
10. It will be fun to watch our matrix fill up.
We will be informed when the next clock will begin to count down.
At this time we do not have any information on the Payment Processor. But I know that we will have all the information we need before they start the FUND clock counting down.
During the registration process all of our information needed to open an account with the Payment Processor was also collected.
At this time we can begin to put funds in our wallets.
You will find your wallet in the back office.
It will still be part of the Payment Processor but access is not necessary through their website every time we want to add, send or transfer funds.
You can fund it with as much money as you need to complete the following steps if you so choose to participate in them.
Step 1
Decide which upgrades you want to put on your Pre-Order form.
You can also use Keys to place your Pre-Order.
You select each Tier one at a time. The software will look in your wallet and see if you have enough funds in your wallet.
If “yes” then it will mark off that Tier.
Select "Use Key" if you want to use it for Tier 1. Again the software will check your wallet and key bank to make sure that you have funds or keys available.
No funds are deducted from your wallet for your Pre-Ordered upgrades.
Here are the 4 Tiers in Stage 1 that you can pre-order.
Everyone pays the same amount for upgrades.
$5 Row 1 Tier 1
$10 Row 2 Tier 2
$20 Row 3 Tier 3
$40 Row 4 Tier 4
Step 2
• BUY (1 to 10) Only shows if balance of keys is 0.
• SEND (1 at a time) Only shows if balance of keys is >0.
• TRANSFER (1 to 10) Only shows if balance of keys is >0.
• USE Only shows if the member is inactive.
During the funding countdown clock we will only be able
to choose 2 options.
Buy: 1 to 10 keys if our balance is zero.
If you want to purchase a larger amount of keys you must contact admin.
TRANSFER: 1 to 10 keys can be transferred to one person at a time.
A drop down window will appear when you click on transfer.
The only people you can transfer keys to is your SPONSOR and your PERSONALLY SPONSORED PEOPLE. All of these names will appear in that drop down window. Once you transfer keys to someone else they assume the ownership of those keys. They could also transfer these keys to their PERSONALLY SPONSORED PEOPLE or back to you (their sponsor).
Naturally all keys bought at this time will be deducted from your wallet.
Step 3
Choose Automatic Upgrade Off:
You must upgrade manually. This could cause loss in upgrade payments from people in your matrix. As long as you are aware you are doing this manually then you are OK.
Choose Automatic Upgrade On Next Tier:
The software will look for what the next Tier is that you need upgrade to.
If funds are available in your wallet the software will automatically upgrade you to that Tier. However, it will also shut off this choice and you must go in and choose Automatic Upgrade On Next Tier again.
Choose Automatic Upgrade On Continuous:
The software will continually watch for the next upgrade you need to pay. If the funds are available in your wallet it will be paid. It will now look at the next upgrade and check your wallet. Again, if the funds are available this upgrade will be paid. If for some reason there is not enough funds in your wallet, the software will check again in an hour. It will keep checking until the funds are available and get the next upgrades paid.
The option is absolutely the greatest idea especially if you work all day and cannot be checking to see if you need to upgrade. You also cannot miss any upgrade with the software continuously check for upgrades and funds.
FUNDING – PRE-ORDERS – AUTOMATIC UPGRADE CHOICES
CLOCK COUNTS DOWN TO ZERO!
The manual upgrade and join buttons
will be turned OFF!
The software will start with the smallest member ID#
and process all upgrades from that member’s Pre-Order table.
This same process will be repeated through every member
that also completed their Pre-Order!
Commissions will be paid!
This whole process will only take several minutes.
Once completed OneX will be turned on for good!
Our choice of "Automatic Upgrades" will now go into effect.
